Westworth Village, TX
Westworth Village Electrical Work, Inspected and Done to Code
We handle panel upgrades, electrical repair, EV charger installation, generators and whole-home rewiring for homeowners in Westworth Village, River Oaks and White Settlement. We tell you what the code asks for, pull the permit when the job needs one, and stay with the work until the inspector signs off.
- Licensed electrical contractor, TECL 36609
- NABCEP certified
- 5 years in business
- Code explained up front
Electrical Services for Your Home
A call usually starts with a single issue: a breaker that keeps shutting off, a panel with no room left, or a new car that needs somewhere to charge in the garage. Our work also covers lighting installation, wiring for remodels and additions, surge protection, generator installs and upkeep, home battery backup systems, and panel torque and cleans. If earlier work left trouble behind, our code corrections and inspection fixes page shows how we straighten it out.
Panel Upgrades
We replace worn or undersized electrical panels, handle the inspection, and leave the new service safe, labeled and on record.
Electrical Repair
Tripping breakers, dead outlets, flickering lights: we test to find the real cause, then make a code-compliant repair you can see and understand.
Lighting Installation
New fixtures, recessed lights, ceiling fans and outdoor lighting, mounted on the right box and wired so the work passes inspection when one is required.
EV Charger Installation
Level 2 charger installs with a real load check, a properly sized circuit and the inspection handled for your home.
Whole-Home Rewiring
We replace worn, outdated wiring throughout your home and walk the job through rough-in and final inspection before the walls close up.
Generator Installation
Standby generators and portable generator hookups sized to your home, connected through a proper transfer switch, and inspected before we turn them over to you.
Generator Service & Repair
We test, maintain and repair standby generators and transfer switches so your backup power starts and carries the load when the grid goes down.
Home Battery Backup
We size a home battery to the circuits you actually need in an outage, mount it in the right spot, and see the job through inspection.
Remodel & Addition Wiring
New circuits, outlets and lighting for kitchens, baths and additions, wired to current code and inspected before the walls close.
Code Corrections
We work through failed inspection notes and home inspection reports item by item, correct the wiring to code, and help you get the sign-off.
Surge Protection
A surge protective device at your panel, installed with short leads and a tested ground, so one unit guards every circuit in your home.
Torque & Cleans
We shut down your panel, clean out dust and debris, and tighten every connection to the maker's torque spec so loose lugs don't turn into heat and damage.
How a Job Runs
Most jobs follow the same few steps, whether it's a single circuit or a new panel.
- 1
You call and book a visit
Tell us what's going on. We'll ask a few questions and set a time to come look.
- 2
We inspect and test
We open the panel, test the circuits involved and check for code issues tied to the work. You'll hear what we found in plain terms.
- 3
You get a written estimate
It lists the work, parts, city fees and what the inspection covers. Take your time with it.
- 4
We do the work to current code
We schedule the job, protect your floors, and wire it the way the code reads today. If power has to go off, we tell you when and for how long.
- 5
Inspection and walkthrough
We meet the inspector when the job requires it and fix anything they flag. Then we walk you through what was done and clean up before we leave.
What Moves the Price of Electrical Work
Every job is priced after we see it. Two panel swaps on the same street can cost very different amounts because of what's behind the cover. These are the things that move the number most.
We look at the job in person, then give you a written estimate by line item. Nothing starts until you've approved it.
- Size of the job
- Adding one outlet is a short visit. A full rewire or a service upgrade takes days and more material.
- Access to the wiring
- Open attic space and a garage wall are easy runs. Finished ceilings, tight crawlspaces and long runs across the house take more time and sometimes drywall patching.
- What we find behind the walls
- Old splices without boxes, undersized wire or scorched connections have to be corrected once they're exposed. We show you photos before adding anything to the scope.
- Equipment and materials
- Panel brand, breaker types, charger model, generator size and fixture choices all change the cost. We'll give you options where there are real choices to make.
- Inspection and utility steps
- Filing fees are set by the local jurisdiction. Some jobs also need utility coordination, such as a meter pull for a service upgrade, which affects scheduling.
Where We Work
We're based in Westworth Village and do residential electrical work across the west side of Fort Worth. That includes River Oaks, White Settlement, Sansom Park, Lake Worth, Edgecliff Village and Benbrook, along with Saginaw, Haltom City and North Richland Hills.
- Westworth Village
- River Oaks
- Fort Worth
- White Settlement
- Sansom Park
- Lake Worth
- Haltom City
- Saginaw
- Benbrook
- Edgecliff Village
- North Richland Hills
Inspection rules vary by city, so we file with whichever jurisdiction covers your address. If you're not sure we come out your way, ask when you call.
Why Homeowners Call Us
Code work isn't exciting, but it's what keeps wiring safe behind your walls. Here's how we run every job.
- 01
We explain the code in plain words
If the code says your kitchen needs GFCI protection or a bedroom needs AFCI breakers, we tell you what that means and why it's there. You'll know what's required and what's optional before you decide anything.
- 02
We handle the paperwork
When a job needs a permit, we file it with the local jurisdiction and schedule the inspection. The forms and the back-and-forth with the city are on us, not you.
- 03
We find the cause first
A tripping breaker is a symptom. We test the circuit, check the connections and find out what's actually wrong before we replace a single part.
- 04
Written scope before work starts
You get a written estimate that lists the work, the parts and any city fees. If we find something new once walls or panels are open, we stop and talk it over with you first.
- 05
Clean work area
We cover floors where we walk, keep drywall dust contained, and haul off old parts and scrap when the job is done.
Questions We Get Often
Something not covered here? (682) 327-0639
Do you handle the permit?
Yes. When a job needs a permit, we file with the local jurisdiction and set up the inspection. New circuits, panel upgrades, EV chargers, generators and rewiring typically require one. You'll know from the start if yours does.
How long is a panel change?
The swap fills most of a day, with the power off for part of it. When we can start also depends on the inspector's schedule and, if the meter has to be pulled, the utility's. The timeline is in your estimate so you can plan around it.
Can I put an EV charger in my garage?
In most homes, yes. We see how much room your panel has left, choose the best wire route and install a dedicated circuit sized for the charger. If the panel is full or too small, we walk you through options like a load management device or a panel upgrade.
Why do my breakers keep tripping?
Most often it's an overloaded circuit, a short or ground fault, or a worn breaker. A loose connection getting hot can cause it too. We test for the actual cause, because dropping in a bigger breaker without checking the wire can lead to a fire.
Can you add outlets or a circuit for a home office or shop?
Yes. We check what's already on the nearby circuits and what you plan to run, then size the new wire and breaker to suit. Shop tools like a compressor or space heater usually need their own line. If the panel has no open slots, we talk through options before we begin.
Our job failed inspection. Can you fix the flagged items?
Yes. Read us the inspector's notes over the phone. We go through each item, explain the code behind it, make the corrections and have everything ready for the inspector's return visit.
Do small jobs like a new light fixture need a permit?
Swapping a fixture on an existing box often doesn't, while new circuits or outlets usually do. Rules differ from city to city, so we check what applies to your address first.
About Westworth Village Electrician
We're a small electrical company that does residential work. We like jobs done the right way the first time, with the wire sized right, the connections tight and the inspection closed out.
A lot of the problems we fix come from work that skipped a step. A breaker too big for its wire. A splice buried in a wall with no box. An addition wired without a permit, so it gets flagged when the house sells. We'd rather explain the rules up front than leave you with that later.
When we're done, you'll have a clear picture of what was installed, what the inspector checked, and what to keep an eye on going forward.
- License
- Licensed electrical contractor, TECL 36609
- In business
- 5 years in business
- Certifications
- NABCEP certified
Ready to Get It Done Right
Tell us what's going on with your wiring. We'll come look, explain what the code calls for, and give you a written estimate.